Water damage to the crawlspace of your home can be a major concern as it can result in expensive damage that will have to be repaired. While the exact work that the encapsulation project will need can depend heavily on the design of the crawlspace, there are some steps that will almost always have to be taken.

A Comprehensive Crawlspace Inspection Will Be Needed To Assess It For Damage

One of the first steps that the crawlspace encapsulation contractor will need to do is to complete a comprehensive assessment of this space for damage. The reality is that extensive damage can occur to the crawlspace of a home over the years. These assessments can allow for this space to be checked for signs of structural damage, such as rot, along with determining if there is a mold issue developing. When these problems are found in a crawlspace, they will have to be repaired before the encapsulation process can continue. Luckily, it is often relatively simple to repair this damage as long as they have not become too severe.

Managing The Humid Air In The Crawlspace Can Be A Major Priority During Encapsulation

Humid air in the crawlspace can be a major concern for most homes. The ground under the house can release moisture, which can cause the crawlspace to have substantially higher humidity levels. In addition to moisture being released from the ground, cool moist air in the home could settle in the lower portions of the structure, which can also contribute to the humidity in the crawlspace being substantially higher. In order to mitigate this tendency, homeowners may find that the encapsulation process will involve improving the ventilation through this area of the home as well as installing dehumidifying systems. These two upgrades can greatly reduce the humidity levels in this area of the home so that the risks of mold and rot forming can be reduced.

Moisture Barriers Can Be An Essential Part Of Encapsulating A Crawlspace

The installation of moisture barriers can be another important step in this process. These barriers will be able to stop water from seeping into the crawlspace. Without these barriers, it could be possible for moisture to enter this space of the home where it may become trapped. A moisture barrier will typically be made of an impermeable material, such as vinyl or rubber. This barrier will be installed along the walls and floor of the crawlspace so that water will have a much harder time seeping into this area of the home.

For more information, contact a crawlspace encapsulation service near you.